SPL MixDream Model 2384 16x2 Analog Summing Mixer - Manual (Page 7)

MixDream 7
IMPORTANT: Adjust the voltage setting on the rear panel so
that it corresponds to your local power conditions! Before
connecting the MixDream XP or any other equipment turn off
all power!
It makes good sense to think about where you place your
MixDream before connecting it. It should be positioned so that
you can easily reach it, but there are other considerations. Try
not to place it near heat sources or in direct sunlight, and avoid
exposure to excessive vibrations, dust, heat, cold or moisture.
It should also be kept away from transformers, motors, power
amplifiers and digital processors.
• Do not open the case. You may risk electric shock and damage
to your equipment.
• Leave repairs and maintenance to a qualified service techni-
cian. Should foreign objects fall inside the case, contact your
authorized dealer or support person.
• To avoid electric shock or fire hazards, do not expose your
unit to rain or moisture.
• In case of lightning, unplug the unit.
• Always unplug the cable by pulling on the plug only; never
pull on the cable.
• Never force a switch or knob.
• Use a soft, lint-free cloth to clean the case. Avoid cleaning
agents as they may damage the unit. if necessary, use an
acid-free cleaning oil instead.
Before You Begin