Sony HVL-F20M External Flash - Manual (Page 13)

13
[PC Clock]
Displays the date and time of the computer
being used.
[Date & Time Format]
Select the date and time format to display.
You can select [yyyy-mm-dd hh:mm:ss],
[mm-dd-yyyy hh:mm:ss], or [dd-mm-yyyy
hh:mm:ss].
[Time Setting]
Select the method for setting the date and
time.
[Keep current setting]: Select to keep the
current settings for the date and time of
the unit.
[Synchronize with PC]: Select to synchronize
the date and time of the unit with the
date and time of the computer.
[Manual Setting]: Select to set the date and
time of the unit manually. Specify a value
in the [Current Date & Time] field.
[Synchronize with NTP]: Select to
synchronize the date and time of the unit
with the NTP (Network Time Protocol)
server of a time server. If you select
[Synchronize with NTP], specify the NTP
server.
[NTP Server]
Synchronize using the entered NTP server
address.
[Time Zone]
Set the time zone for the region in which the
unit is installed relative to Greenwich Mean
Time.
If the time zone selected in [Time Zone] and
the time zone of the computer are different,
a date and time reflecting the difference in
time zones is set on the unit.
To adjust for Daylight Savings Time
automatically
Place a check mark in [Automatically adjust
for Daylight Savings Time.] to automatically
adjust the time for daylight savings time
(summer time) in the selected time zone.
10
When finished, click the [OK] button.
The initial setup is completed.
When finished, the following screen appears.
The status of the unit is displayed on the
[Information] page.
For details about the [Information] page, see
“[Information] Page” (page 15).
11
Click [Administration Menu] to configure
the device settings of the unit.
An authentication dialog will appear when
the unit is currently accessed by a user other
than the administrator.
Enter the administrator user name and
password in the authentication dialog, and
click the [OK] button to access the unit as the
administrator.
The device settings screen of the unit
appears.
For details about device settings, see
“Configuration (Device Settings)” (page 14).
Note
Tip