Sony BRAVIA BZ40H 85" Class HDR 4K UHD Digital Signage & Conference Room LED Display - Manual (Page 54)

54 EN
STR-AN1000
5-037-028-11(1)
Updating the Software
By updating your software to the latest
version, you can take advantage of the
newest functions.
The new software is available when:
– the “UPDATE” indicator lights up on the
display panel.
– a message appears on the TV screen if the
[Software Update Notification] is set to [On].
Note
Do not turn the receiver off or disconnect the AC
power cord (mains lead) and the LAN cable until the
download and update processes are completed.
Doing so may cause a malfunction.
1
When you use Sony wireless
rear speakers/subwoofer (not
supplied), turn on each
speaker and make sure the
connection with the receiver is
established.
The power indicator of the Sony wireless
rear speakers/subwoofer (not supplied)
lights up in green.
2
Press HOME.
The home menu is displayed on the TV
screen.
3
Select [Setup] –
[Software Update].
4
Select [Network Update] or
[USB Update].
If you select [USB Update], please visit
the following customer support website
to download the latest software version.
https://www.sony.com/am/support
5
Check the software update
progress.
DL XXX%
UPDATEXXX%
The progress rate is displayed in
percentage. The progress of loading
software will be displayed as “DL XXX%”
for the network update, and “RD XXX%”
for the USB update.
When the update is completed,
“COMPLETED” appears on the display
panel and the receiver restarts
automatically.
Note
• It may take up to about 20 minutes for the update
to be completed.
• You cannot restore the old version after updating
the software.
• Set [Auto Update] to [On] when you want
to perform software updates automatically.
Depending on the contents of the updates,
software update may be performed even if you
set [Auto Update] to [Off]. For details, visit the Help
Guide.
• If the update of Sony wireless rear speakers/
subwoofer (not supplied) does not work, move
them closer to the receiver and update them.