Sony BRAVIA BZ40H 85" Class HDR 4K UHD Digital Signage & Conference Room LED Display - Manual (Page 18)

18 EN
STR-AN1000
5-037-028-11(1)
Speaker configuration and speaker pattern settings
This receiver allows you to connect up to a 7.1-channel system.
The table below shows examples of speaker configurations and speaker pattern settings. For
details on connections, see page 19 to 24.
Speaker configuration in each zone [Surround Back
Speaker Assign]*
[Speaker Pattern]
setting
For connection,
see page
Main zone Zone 3
5.1-channel Not used — [5.1] 19
7.1-channel using
surround back speakers
Not used — [7.1] 20
5.1.2-channel using top
middle speakers
Not used — [5.1.2 (TM)] 21
5.1.2-channel using
Dolby Atmos enabled
speakers
Not used — [5.1.2 (FD)] 22
5.1-channel with Zone 3
speakers
2-channel [Zone3] [5.1] 23
5.1-channel with Bi-
Amplifier connection
Not used [BI-AMP] [5.1] 24
* You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have
surround back and height speakers.
Tip
• This receiver allows you to connect Sony wireless rear speakers and a Sony subwoofer (page 26).
• When your Sony TV has the S-CENTER SPEAKER IN jack, you can output the center part of the receiver sound
from the TV speaker (page 30).
• By setting [SpeakerRelocation/PhantomSurroundBack] to [Type A] or [Type B] in the [Audio Settings]
menu, you can enjoy a surround effect equivalent to up to 7.1.2 channels in terms of hearing. When you set
[SpeakerRelocation/PhantomSurroundBack], perform Auto Calibration in advance (page 43).