Sony BRAVIA BZ40H 85" Class HDR 4K UHD Digital Signage & Conference Room LED Display - Manual (Page 26)

26 EN
STR-AN1000
5-037-028-11(1)
Connecting to Sony wireless rear speaker/subwoofer
The receiver is compatible with connection to Sony wireless rear speaker/subwoofer (not
supplied).
When you connect the wireless rear speaker/subwoofer to the receiver for the first time, follow
the steps below.
Once connected, the Sony wireless rear speaker/subwoofer will be automatically connected to
the receiver the next time you turn on the power.
1
Press HOME.
The home menu is displayed on the TV screen.
2
Select [Setup] – [Speaker Settings] – [Wireless Speaker Settings] –
[Start manual linking].
3
Press LINK on the speaker (not supplied).
The power indicator of the speaker (not supplied) flashes twice repeatedly in green.
4
Select [Start].
The manual connection starts. The connecting process appears on the TV screen. To cancel
the manual connection, select [Cancel].
5
When [Connected] is displayed for the target speakers, select [Finish].
6
Press (enter).
The manual connection is established and the power indicator of the speaker (not supplied)
lights in green.
7
Follow the on-screen instructions to perform Auto Calibration.
When the connection settings of wireless speakers are complete, a screen that guides you
to [Auto Calibration] is displayed.
When you connect a wireless rear speaker, select either [Surround Speaker] or
[Surround Back Speaker] on the [Wireless Speaker Assign] screen in Auto Calibration to
assign the speaker position.
Tip
• For the wireless rear speaker/subwoofer models compatible with the receiver, visit the Sony website.
• If you connect 2 wireless subwoofers, use the same model.
• For details on the wireless rear speaker/subwoofer, refer to the operating instructions supplied with each
speaker.