Sony BRAVIA BZ40H 85" Class HDR 4K UHD Digital Signage & Conference Room LED Display - Manual (Page 38)

38 EN
STR-AN1000
5-037-028-11(1)
Note
• To use this connection, set [HDMI OUT B Mode] in the [HDMI Settings] menu to [Zone2].
• You can only playback input from the HDMI IN jacks in Zone 2. When [SOURCE] is selected, the video and
sound that are input from the HDMI IN jack selected in the main zone are played.
• You can only select an input from the HDMI IN jacks in Zone 2. Since the audio signals are output from the
HDMI OUT B/ZONE 2 jack as they are, you cannot adjust the volume level on the receiver. Adjust the volume
on the device connected to the HDMI OUT B/ZONE 2 jack.
Connecting another amplifier in Zone 3
You can enjoy sound from a device connected to the receiver in a zone other than the main zone.
For example, you can watch a DVD in the main zone and listen to music received from music
services in Zone 3.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Amplifier/
Receiver
Main zone Zone 3
Speaker Speaker
Audio signals
 Audio cable (not supplied)
Note
• To enjoy [USB], [Home Network], [Bluetooth Audio], [Chromecast built-in], [Spotify], or [AirPlay] in Zone 3,
select [SOURCE] for the zone 3 input, then and switch the main zone input.
• You can select an input from four external inputs (SAT/CATV, AUX, TV, or SA-CD/CD), FM radio, and [SOURCE]
in Zone 3. When one of the external inputs is selected, the audio of the device connected to the AUDIO IN jack
is played. To play other inputs, such as Bluetooth Audio, or the external digital input from the OPTICAL IN TV
jack, the COAXIAL IN SA-CD/CD jack, or the HDMI IN jacks, select the target input for the main zone, and then
select [SOURCE] for Zone 3.
• If you set [DSD Native] in [Audio Settings] to [On], no audio signals for DSD content from [USB] or
[Home Network] are output to the Zone 3 speakers.