Roland MOBILE AC: Acoustic Chorus Battery-Powered Amplifier - Manual (Page 7)

Panel Descriptions
5
D
eu
tsc
h
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
English
Side Panel (Connecting Your Equipment)
NOTE
To prevent malfunction and equipment
failure, always turn down the volume, and
turn off all the units before making any
connections.
MIC jack
Connect a microphone equipped
with a 1/4” phone plug.
GUITAR jack
A guitar equipped with a pickup
can be connected here.
AUDIO jacks
Connect a digital audio player or
CD player.
Either stereo mini-plug or RCA
phono connection is supported.
The sound of the devices connected
to the stereo mini-jack and the RCA
phono jacks will be mixed.
[REVERB] knob
This knob applies reverb to the sound of the microphone and the guitar, creating a spacious reverberation that
makes it sound like you are performing in a large room or hall. Turning the knob toward the right will produce
increasingly deeper reverberation. If you don’t want to apply reverb, set the knob to the OFF position.
Adjusting the brightness of the sound
[TONE] knob
This knob adjusts the brightness of the sound that’s output by the MOBILE AC.
Turning the knob toward the right will brighten the sound; turning it toward the left will produce a milder tone.
Applying reverb