Roland MOBILE AC: Acoustic Chorus Battery-Powered Amplifier - Manual (Page 6)

4
Panel Descriptions
Top Panel
Adjusting the volume
Power indicator
This indicator lights when the unit is turned on.
* When operating on battery power only, the unit’s indicator will become dim during play when battery
power gets too low. Replace the battery as soon as possible.
[CHORUS] switch
If you press this switch to turn it on, chorus will be applied to the sound of your guitar.
This creates a beautifully spacious sound. On the MOBILE AC, the right speaker (as you face the
unit) emits the effect-processed sound while the left speaker emits the direct sound.
The chorus effect is created as the sounds from the left and right speakers are mixed in the air (spacially synthesized
chorus).
OFF ON
Applying chorus to the sound of your guitar
[WIDE] switch
If you press this switch to turn it
on, the sound image produced
by the MOBILE AC will be
broadened.
If you’re using chorus and reverb, the broadening
effect will be even stronger.
OFF ON
Widening the sound
[MIC VOLUME] knob
This knob adjusts the volume of the microphone.
[GUITAR VOLUME] knob
This knob adjusts the volume of the guitar.
[AUDIO VOLUME] knob
This knob adjusts the volume of the device
connected to the AUDIO jacks (stereo mini-jack
and RCA phono jacks).
* If you want to independently adjust the
volume of the devices connected to the
stereo mini-jack and the RCA phono
jacks, adjust the volume on the devices
themselves.