Connecting external equipment, Turning the power on/off, P. 6) – Roland TD-02K V-Drums Electronic Drum Kit User Manual
Page 6: Turning the power on, Turning the power off, Quick start
6
6
Quick Start
Turning the Power On
1 .
Connect headphones or amplified speakers
to the TD-02.
* If amplified speakers are connected, minimize the
volume of the amplified speakers.
* To prevent malfunction and equipment failure, always
turn down the volume, and turn off all the units before
making any connections.
2 .
Press the [
Ā
] (POWER) button.
The power to the TD-02 is turned on.
3 .
If amplified speakers are
connected, turn on the power of
the amplified speakers, and adjust the
volume.
4 .
Use the [
Ć
] [
ć
] (VOLUME)
buttons on the unit to
adjust the volume.
Turning the Power Off
1 .
If amplified speakers are connected to the
unit, minimize the volume of amplified
speakers and turn off their power.
2 .
Long-press the [
Ā
] (POWER) button on the unit.
The power to the TD-02 is turned off.
* You must turn off the power by long-pressing the [
Ā
] (POWER)
button. The settings are not saved if the power supply is
disconnected due to the power cord getting pulled out.
Turning the Power On/Off
Using the Auto Off Function
The power to this unit will be turned off automatically after
a predetermined amount of time has passed since it was last
used for playing music, or its buttons or controls were operated
(Auto Off function). If you do not want the power to be turned
off automatically, disengage the Auto Off function (p. 19).
NOTE
¹
Unsaved data is lost when the power turns off. Before
turning the power off, save the data that you want to keep.
¹
To restore power, turn the power on again.
Connecting External Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any
connections.
* Be careful not to get your fingers pinched by the movable parts when you operate the drum sound module holder. If using
this in a location where children are present, be sure to provide adult supervision or guidance.
TD-02
DC IN jack
Connect the included AC adaptor to
this jack.
MIX IN jack (Stereo)
Connect your audio player or
smartphone here. You can perform
along with a song that’s playing on
your smartphone or other
mobile device.
Ø
OUTPUT/PHONES jack
Outputs the sound. Connect
headphones or an amplified
speaker.
Bluetooth ADAPTOR jack
Connect a BOSS
Bluetooth
®
Audio MIDI
Dual Adaptor (BT-DUAL: sold separately)
to play along with the song you hear
on your smartphone that’s connected
wirelessly.
Ø
USB COMPUTER port
If the unit is connected to
your computer via a USB cable
(commercially available), you can
transmit and receive MIDI and audio
data.
Ø
“Using This Unit with Computer
TRIGGER INPUT connector (rear)
Connect the included dedicated
connection cable to this connector, and
use it to connect the pads and pedals.