Roland PD-8 - Dual-Trigger Rubber Drum Pad - Manual (Page 8)

8
KD-8
Features
• Velocity sensitive pad provides rich expression.
• Vertical trigger surface for extremely quiet
performance. Also compatible with twin pedals.
Contents of the Box
Panel Description
Making the Settings
921
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
1. Remove the screws attached to the reverse side
of the KD-8’s trigger.
2. Pull out the stand in the direction indicated by the
arrow until it is fully extended.
3. Using any commercially available tuning key,
tighten the screws removed in Step 1 so that the
stand is firmly secured.
4. Attach the kick pedal.
Position the beater so that it strikes the center of the head,
then secure the kick pedal and KD-8 firmly in place.
❑ KD-8 (pad unit)
❑ Connection Cable (monaural)
❑ Screws (attached to the bottom panel)
■ Owner's Manual (this manual)
* This package does not include a kick pedal and beater.
Use with a commercially available kick pedal and beater.
Anchor Bolt
Head
Foot Plate
Stand
Output Jack
Install the kick pedal securely.
Beater
PD/CY/KD/FD-8_e 8 ページ ２００４年４月９日 金曜日 午前９時３９分