Roland PD-8 - Dual-Trigger Rubber Drum Pad - Manual (Page 11)

11
FD-8
Features
This hi-hat controller pedal features freely adjustable
pedal plate angle and tension. It provides open, closed,
and half-open sounds and continuous control from full
open to closed positions for richly expressive hi-hat work.
Contents of the Box
Panel Description
Specifications
FD-8: Hi-Hat Control Pedal
Control Out Jack: 1
Dimensions: 130 (W) x 396 (D) x 103 (H) mm
5-1/8 (W) x 15-5/8 (D) x 4-1/16 (H) inches
Weight: 1.3 kg / 2 lbs 14 oz
Accessories: Owner’s Manual, Connection Cable,
Tuning Key
962a
In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change without
prior notice.
Making the Settings
921
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
• The tips of the anchor bolts are sharp. Handle with care.
• When using on flooring, the anchor bolts may damage
the floor. Do not attach the anchor bolts.
• When the FD-8 is not going to be used for a long period
of time, move and fix the arm, allowing longer travel for
the pedal.
• To avoid damage, do not leave the FD-8 for extended
periods of time with the pedal plate depressed.
Connecting to a Percussion Sound
Module
1. Use the included connection cable and connect
the control out jack of the FD-8 to the Hi-Hat
Control jack of the percussion sound module.
Connect the L-shaped plug of the included cable to the FD-
8. This will prevent strain from being applied to the FD-8.
Contents of the Package
❑ FD-8 (pad unit)
❑ Connection Cable (monaural)
■
Owner's Manual (this manual)
Anchor Bolt
Pedal Plate
Control Out Jack
shallow
deep
Shift the Arm
Adjusting the Travel of the Pedal
Control Out Jack
Attaching the Anchor Bolts (When Using on the Carpet)
Anchor Bolt
Spring for
the Anchor Bolt
Pedal Plate
Loosen the nut with the included tuning key.
After adjusting, tighten the nut.
PD/CY/KD/FD-8_e 11 ページ ２００４年４月９日 金曜日 午前９時３９分