Roland PD-8 - Dual-Trigger Rubber Drum Pad - Manual (Page 7)

7
CY-8
1. Use the included connection cable and connect
the output jack of the CY-8 to the trigger input
jack of the percussion sound module.
Connect the L-shaped plug of the included cable to the CY-
8. This will prevent strain from being applied to the CY-8.
To make use of edge shot and choking play techniques,
you’ll need to connect to a trigger input jack on the
percussion sound module that accommodates rim shots.
2. Leave some slack in the cable to ensure that they are
not pulled by the movement of the CY-8 when struck.
fig.CY04a.e
3. Make the trigger settings for the percussion sound
module. For the recommended values, refer to p. 12.
Should you neglect to make the appropriate settings for
the percussion sound module, you could likely experience
the following problems:
• Sometimes it does not sound (uneven volume)
• The volume is too low (reduced sensitivity)
For information on how to change the parameters for a
percussion sound module, refer to the documentation for
the percussion sound module you’re using.
Playing the CY-8
Bow Shot
This is the most common playing method, playing the pad face
of the cymbal. It corresponds to the sound of the “head-side” of
the connected trigger input.
Edge Shot
This playing method involves striking the edge with the
shoulder of the stick. It corresponds to the sound of the “rim-
side” of the connected trigger input.
To make use of edge shot, you’ll need to connect to a
trigger input jack on the percussion sound module that
accommodates rim shots.
Choking
Choking (pinching) the cymbal’s edge with the hand
immediately after hitting the cymbal makes the sound stop.
To make use of choking play techniques, you’ll need to
connect to a trigger input jack on the percussion sound
module that accommodates rim shots.
Specifications
CY-8: Cymbal Pad
Pad Size: 12 inches
Triggers: 2 (Bow, Edge)
Dimensions: 290 (W) x 295 (D) x 45 (H) mm
11-7/16 (W) x 11-5/8 (D) x 1-7/8 (H) inches
Weight: 650 g / 1 lb 7 oz
Accessories: Owner’s Manual, Connection Cable, Wing Nut,
Felt Washer, Stopper
Options: Cymbal Mounts (MDY-7U, MDY-10)
Drum Stands (MDS-3C, MDS-6, MDS-8C,
MDS-10, MDS-20)
962a
In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change without
prior notice.
Leave some slack
in the cable
Bow
Edge
PD/CY/KD/FD-8_e 7 ページ ２００４年４月９日 金曜日 午前９時３９分