Roland VC-100UHD 4K Video Scaler/Converter/Streamer - Manual (Page 24)

24
Setup Menu List
Processing
Input
Menu item
(Parameter)
Value
(Bold: default)
Explanation
Channel CH. 1 –8
Selects the channels to input to the processing system.
If the input source is the same before and after switching, the video cuts to the
next one. If the input source differs, the video switches by fading to black.
Source – Shows the source selected for the channel.
State – Shows the status of the signal from the source selected for the channel.
Main Processing
Menu item
(Parameter)
Value
(Bold: default)
Explanation
Format
Refer to “Output video formats”
(p. 9)
Sets the output format.
* The selectable formats differ depending on the system’s “Frame Rate” value
(p. 31).
Fade to Black
This sets whether the fade effect applied to the output video uses the FTB function or not.
THRU The FTB function is not used.
FTB
The FTB function is used to fade the output video to black.
* The fade time is set in the “Fade Time” system parameter (p. 31).
Color Gamut REC.601, REC.709, REC.2020, Auto Specifies the color gamut.
Dynamic Range SDR, HDR PQ, HDR HLG, Auto Specifies the dynamic range.
Flip H Disabled , Enabled Set this to “Enabled” to flip (invert) the video horizontally.
Flip V Disabled , Enabled Set this to “Enabled” to flip (invert) the video vertically.
Rotation Disabled , Enabled Set this to “Enabled” to rotate the video clockwise 90°.
ROI (Region of Interest) Disabled , Enabled Enables/disables the ROI function.
Size H 0–16384 Sets the ROI’s horizontal size in pixels.
Size V 0–4320 Sets the ROI’s vertical size in pixels.
Position H -16384– 0 –+16384 Sets the ROI’s horizontal position in pixels.
Position V -4320– 0 –+4320 Sets the ROI’s vertical position in pixels.
Masking Color
Black , White, Red, Green, Blue,
Yellow, Cyan, Magenta
Sets the color of the area outside of the ROI.
Sub Processing
Menu item
(Parameter)
Value
(Bold: default)
Explanation
Sub Processing Disabled , Enabled
Enables/disables the sub processing.
* Set this to “Disabled” when EDID (p. 29) is set to “Sink Through” in “Input”
0 “HDMI,” or when “Rotation” (p. 24) in Main Processing is set to “Disabled.”
Format
Refer to “Output video formats”
(p. 9)
Sets the output format.
* The selectable formats differ depending on the system’s “Frame Rate” value
(p. 31).
Fade to Black
This sets whether the fade effect applied to the output video uses the FTB function or not.
THRU The FTB function is not used.
FTB
The FTB function is used to fade the output video to black.
* The fade time is set in the “Fade Time” system parameter (p. 31).
Color Gamut REC.601, REC.709, REC.2020, Auto Specifies the color gamut.
Dynamic Range SDR, HDR PQ, HDR HLG, Auto Specifies the dynamic range.
Flip H Disabled , Enabled Set this to “Enabled” to flip (invert) the video horizontally.
Flip V Disabled , Enabled Set this to “Enabled” to flip (invert) the video vertically.
Rotation Disabled , Enabled Set this to “Enabled” to rotate the video clockwise 90°.
ROI (Region of Interest) Disabled , Enabled Enables/disables the ROI function.
Size H 0–16384 Sets the ROI’s horizontal size in pixels.
Size V 0–4320 Sets the ROI’s vertical size in pixels.
Position H -16384– 0 –+16384 Sets the ROI’s horizontal position in pixels.
Position V -4320– 0 –+4320 Sets the ROI’s vertical position in pixels.
Masking Color
Black , White, Red, Green, Blue,
Yellow, Cyan, Magenta
Sets the color of the area outside of the ROI.