Roland VC-100UHD 4K Video Scaler/Converter/Streamer - Manual (Page 20)

20
Other Functions
6 . Select the “Use the following IP address” check box,
and input the numbers shown below.
IP address 192.168.10.11
Subnet mask 255.255.255.0
Default gateway 192.168.10.1
7 . Select the “Obtain DNS server address automatically”
option, and then click the [OK] button.
Mac OS
1 . Display the Apple menu 0 “System Preferences” 0
“Network.”
2 . From the list on the left, select the network connection
service you’re using.
3 . Set “Configure IPv4” to “Manually,” and input the
numbers shown below.
IP Address 192.168.10.11
Subnet Mask 255.255.255.0
Router 192.168.10.1
4 . Click the [Apply] button.
Returning to the Factory Settings
(Factory Reset)
Here’s how you can return the settings of the unit to their factory-set
state.
If following the procedures described in this manual does not cause
the result you expect, try executing a factory reset.
NOTE
The contents of all settings you’ve made thus far, and the settings
saved in internal memory are lost when you perform a factory reset.
1 . Select Root menu “System” 0 “Factory Reset,” and
then press the [PAGE/CURSOR] knob.
2 . Press the [PAGE/CURSOR] knob.
Factory reset is executed.
When the operation is finished, the message “Done.” appears.