beautypg.com

Samsung S95UA 49" 1440p HDR 120 Hz Curved Ultrawide Monitor User Manual

Page 32

background image

32

2nd

3rd

Description

Dynamic Brightness

Automatically adjust the Brightness to provide the best possible screen contrast under the current conditions.

This menu is not available when

PBP Mode

is enabled.

Off Timer Plus

Off Timer

Off Timer

: Turn on

Off Timer

mode.

Turn Off After

: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of

hours.

This option is only available when

Off Timer

is set to

On

.

For products for the market in some regions, the

Off Timer

is set to automatically activate 4 hours after the product powers on. This is done in accordance

with power supply regulations. If you do not want the timer to activate, go to

System

Off Timer Plus

and set

Off Timer

to

Off

.

Eco Timer

Eco Timer

: Turn on

Eco Timer

mode.

Eco Off After

: The

Eco Off After

can be set between 10 and 180 minutes. The product will automatically power off after the specified time has

elapsed.

This option is only available when

Eco Timer

is set to

On

.

PC/AV Mode

Set

PC/AV Mode

to

AV

. The picture size will be enlarged.

This option is useful when you view a movie.

Products with a display area of 16:9 or 16:10 are only supported.

DisplayPort Ver.

Select your Displayport.

Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.

If the product (in

DisplayPort

mode) is displaying the message

Check the cable connection and the settings of the source device.

press the JOG button to

display the Function Key Guide screen and then select

System

DisplayPort Ver.

1.1

/

1.2

/

1.4

.

If setting the

DisplayPort Ver.

to

1.1

, for the bandwidth limitation of the DisplayPort 1.1 protocol, the actual maximum output refreshing rate of the graphics

cards cannot achieve the level of 120 Hz.

If the PC has entered BIOS mode and the BIOS screen does not appear, go to the following path and then select the mode.

System

DisplayPort Ver.

1.1

/

1.2

/

1.4

.