beautypg.com

Routine maintenance, Using the main brush cleaning tool main brush – Roborock S6 MaxV FCC User Manual

Page 27

background image

25

Routine maintenance

Using the main brush cleaning tool

Main brush

Clean weekly

1. Turn over the robot, press the latch, and remove the main brush cover.
2. Pull out the main brush. Remove and clean the main brush bearing.
3. Rotate the main brush cap in the indicated unlock direction to remove the
cap.
4. Use the main brush cleaning tool to remove any entangled hair on the brush
or bearing.
5. Rotate the main brush cover and main brush bearing in the indicated lock
direction to reinstall them.
6. Reinstall the main brush, press on the main brush cover, and lock it.

Use the tool blade to cut away entangled hair on the brush and to clean
the bristles.

Main Brush

Cover

Alignment

Main Brush

Bearing

Latch
Main Brush

Main Brush
Cap

Note:

If there is a large amount of hair, or if hair is tightly entangled, remove it carefully to avoid damage.

Unlock

Lock

Note:

Replace the main brush every 6 to 12 months for optimal cleaning performance.