Roborock S6 MaxV FCC - Manual (Page 19)

17
Attach the Moisture-Proof Mat 3.
of the double-sided tape attached to the bottom of the Moisture-Proof
Mat, and stick the mat to the ground as shown.
Note:
The robot may not be turned on when the battery is low. In this case, connect the robot to the
Charging Dock.
Powering On and Charging 4.
Press and hold the button to power on the robot. Wait until the
power light is steady, and then place the robot on the Charging Dock to
charge. The robot is equipped with a built-in high performance lithium-
ion rechargeable battery pack. To maintain battery performance, keep
the robot charged during normal use.
The color of the power
indicator indicates the
battery level.
White: 20%;
Red: < 20%
Note:
Peel the double-sided tape slowly to minimize residual adhesive.
The Moisture-Proof mat attaches better to smooth surfaces.
Installation