Roborock S6 MaxV FCC - Manual (Page 22)

20
Installation
Using the Robot
Install the Mop Cloth Bracket
Slide the bracket along the back of the water tank. A click indicates that
it is locked in place.
Note:
The mop cloth should be cleaned after 60 minutes of mopping to ensure
Start cleaning.
Remove the Mop Cloth Bracket
Remove the Mop Cloth Bracket from the water tank
7.
8.
9.
10.
Charging is complete when the power indicator light changes from
breathing to a steady white light. Press the button or use the app
to start cleaning.
When the robot returns to the Charging Dock after cleaning, press the
latches on both sides, and slide the Mop Cloth Bracket backwards to
remove it.
Press the two side latches inwards and slide the Mop Cloth Bracket
backwards as shown to remove it from the water tank.
Low
WaterLevel
Medium
Water Level
High
Water Level
Note:
After mopping, remove the Mop Cloth Bracket, pour out residual water from the water tank, and
clean the mop cloth to avoid mold and odor.
Remove the Mop Cloth Bracket when not mopping.