Sharp PN-H801 - Manual (Page 39)

39
E
Specifications
n Product Specifications
Model PN-H801
LCD component 80" Class [80-1/2 inch (204.4cm) diagonal] TFT LCD
Max. resolution (pixels) 3840 x 2160
Max. colors Approx. 1.06 billion colors
Pixel pitch 0.464 mm (H) × 0.464 mm (V)
Viewing angle 176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 70-1/8 x 39-7/16 (1781.76 x 1002.24)
Computer input signal HDMI, Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal Horizontal/vertical separate (TTL: positive/negative)
Plug and play VESA DDC2B
Input terminals Video HDMI x 4
- HDCP1.4 compatible (HDMI1 - HDMI3)
HDCP2.2 compatible (HDMI4)
- ARC compatible (HDMI1)
- MHL compatible (HDMI4)
Mini D-sub 15 pin, 3 rows x 1
Audio 3.5 mm mini stereo jack x 1
Serial (RS-232C) 3.5 mm mini stereo jack x 1
USB flash drive x 1
Output terminals Audio Digital audio output (optical) x 1
3.5 mm mini stereo jack x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output 10 W + 10 W
Internal memory 400 MB
Power requirement AC 100 - 240 V, 5.6 A, 50/60 Hz
Operating temperature * 1 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption (Maximum / standby mode * 2 ) 490 W/0.5 W
Dimensions (excluding protrusions) inch (mm) Approx. 71-1/2 (W) x 4-1/2 (D) x 41-1/8 (H) (1816 x 114 x 1045)
Weight lbs. (kg) Approx. 119.0 (54)
*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases,
please check the temperature condition specified by the optional equipments.
*2 When POWER SAVE MODE is set to ON. When POWER SAVE MODE is set to OFF: 27 W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.