Sharp PN-60TA3 User Manual
Sharp Monitors
![background image](https://www.manualsdir.com/files/867178/content/doc001.png)
3.
Turn on the power
Power button/Power LED
(1) Turn on the main power
switch.
Set a AAA battery in the touch pen and the AA
battery in the Remote Control Unit.
1.
Connect the touch pen adapter
2.
Prepare the touch pen and the Remote
control Unit
Insert the touch pen adapter into the touch
pen adapter port on the backside of the
monitor.
(2) Push the power button.
4.
Set the operation mode
Easy Setup Guide for PN-70TA3/PN-60TA3
LED Status
Status of the monitor
Green
Power on
Orange
Power off(Standby mode)
Orange flashing
Power off
(Whiteboard standby mode)
Green flashing
Input signal waiting mode
5.
Set the date/time of the monitor
Set the date and time by the remote control
unit.
Set the operation mode by the remote control
unit.
6.
Enable the system mode
(1) Touch a toolbar
in the launcher.
(3) Enter password.
(2) Touch “Settings”
in the launcher menu.
Enter the password set in admin password.
If a password is not set , enter “00000”