Sharp PN-H801 - Manual (Page 30)

30
E
You can restrict operations.
1. Hold SIZE down until “F” appears in the left of the
screen.
2. While “F” appears, press , , , in that
order.
[OFF]
[OFF]
[OFF]
[OFF]
[ON 1]
[ON]
[OFF]
FUNCTION
POWER BUTTON LOCK
RC LOCK
MONITOR LOCK
MENU LOCK
ON SCREEN DISPLAY
LED
PORTRAIT ROTATE
SELECT ENTER ENTER EXIT RETURN
3. Select and set the items.
POWER BUTTON LOCK
You can disable the remote control POWER button or
the monitor POWER switch.
OFF ....................... Enables operation.
ALL LOCK ............. Disables the power buttons on the
monitor and remote control unit.
MONITOR LOCK ... Disables the power switch on the
monitor.
RC LOCK............... Disables the power button on the
remote control unit.
RC LOCK
You can disable the remote control buttons other than
power button.
MONITOR LOCK
You can disable the monitor switches other than power
switch.
MENU LOCK
You can disable use of the remote control with
MENU
.
ON SCREEN DISPLAY
Shows/hides the menu, modes and messages.
The FUNCTION screen cannot be hidden.
ON 1 .............. Shows all menus, modes and messages.
ON 2 .............. Hides messages automatically displayed
by the display. Shows messages during
operation.
OFF ............... Hides all menus, modes and messages.
LED
Specifies whether to light the power LED.
PORTRAIT ROTATE
If video is upside down when the monitor is installed in
portrait orientation, you can rotate the video 180 degrees.
This function is for the portrait installation only. Do not
select this function for the landscape installation.
After changing a setting, turn the main power off and
then on.
Rotate the video
180 degrees
4. Press RETURN to return to the normal screen.
Functional Restriction Setting (FUNCTION)