Sharp PN-H801 - Manual (Page 14)

14
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
2
Power cord (Supplied)
AC input terminal
Main power switch
1
For power
outlet
3
Removing the Handles
The handles can be removed.
Handle
Handle screws
Caution
• The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.
• To attach handles, be sure to use the handles and handle screws which were removed from this monitor.
• Be sure the handles are attached securely.
TIPS
• When installing the monitor in landscape orientation, be sure to clamp the power cord (supplied) onto the cable clamp
attachment using the supplied cable clamp (for power cord). When clamping the power cord, take care not to stress the
terminal of the power cord. Do not bend the power cord excessively. For information on how to attach the cable clamp, see
page 15.
Power cord (Supplied)
Cable clamp (for power cord)