Playing files, Nsupported formats, Nselect the media from which the file will play – Sharp PN-H801 User Manual
Page 20
20
E
You can play photo, music, and video files in a USB flash drive
connected to the monitor, or photo files in internal memory.
For information on USB flash drive, see page 13.
n
Supported formats
The types of files that can be played are as follows.
The operation of formats not indicated in the table is not guaranteed.
Photo files
Extension
Display size
*.jpg (*.jpeg, *.jpe)
32 x 32 - 8192 x 8192 (pixel)
• Progressive JPEG files are not supported.
• Supported color formats are YUV4:4:4/YUV4:2:2/YUV4:2:0.
Music files
Extension
Audio codec
*.mp3
MPEG-1 L3
*.wav
WAV (LPCM)
*.wma
WMA
*.m4a
AAC (MPEG4)
Video files
Video files up to Full HD can be played.
Extension
Video codec
Audio codec
*.m2ts
MPEG2/H.264
AAC, AC-3, MP3, LPCM
*.mp4
H.264
AAC, AC-3, MP3
*.3gp
H.264
AAC
*. mov
H.264
AAC, AC-3, MP3, LPCM
• Both video codec and audio codec need to be supported.
• The recommended frame rate for video 30 fps.
• In some cases it may not be possible to play the above files.
• Do not place files other than the above in memory for
playback.
• When file names or folder names are long, some characters
may not appear in the list screen.
• Do not use a file that is over 2 GB.
Playing files
Play files in a USB flash drive
• You can play photo, music, and video files in a USB flash
drive connected to the monitor.
• You can have photo or video files play automatically when a
USB flash drive is connected or the power is turned on. (See
page 22.)
Play files in internal memory
• You can play photo files in internal memory. The photo file
must first be copied to internal memory. (See page 21.)
• You can have photo files play automatically when the power
is turned on. (See page 22.)
n
Select the media from which the file will play
1. Change an input mode to MULTIMEDIA. (See page 18.)
When a USB flash drive is connected, the input mode
automatically changes to MULTIMEDIA.
2. Press
DISPLAY
(F1).
3. Select the media with
or
.
4. When you have finished, press
ENTER
.
Playing files