Sharp MX-FR52U - Manual (Page 12)

10
When the data security kit is installed
Security Settings in the FTP Pull Print Function
When the machine is used as a network printer and the FTP Pull Print
function is used, the data security kit enables authentication of the user by
means of a "User Name" and "Password" for the FTP server. (The Pull Print
function allows a file on a previously stored FTP server to be printed directly
from the operation panel of the machine without using the printer driver.)
User authentication is enabled by selecting the [Enable User Authentication]
checkbox on the machine for configuring FTP Pull Print settings. This
checkbox appears when the data security kit is installed, and is initially
selected (a checkmark appears).
n Procedure for directly printing a file on an FTP server
(when user authentication is enabled)
Your user name and password must be entered following selection of the
FTP server that contains the file to be printed from the touch panel of the
machine.
When the FTP server is selected in step 3 of "DIRECTLY PRINTING A
FILE ON AN FTP SERVER" in "PRINTER" in the User’s Manual (PC), a
screen will appear prompting you to enter your user name and password
for the FTP server.
Tap the [User Name] key to enter your user name and the [Password] key
to enter your password. A letter entry screen will appear in each case.
When you have finished entering your user name/password, tap the
[Enter] key.
After entering your user name and password, continue from step 4 of
"DIRECTLY PRINTING A FILE ON AN FTP SERVER" in "PRINTER" in
the User’s Manual (PC).