Canon PowerShot SX410 IS - Manual (Page 27)

27
ç Contents
2
Charge the battery pack.
● CB-2LF: Flip out the plug (1) and
plug the charger into a power
outlet (2).
● CB-2LFE: Plug the power cord
into the charger, then plug the
other end into a power outlet.
● The charging lamp turns orange,
and charging begins.
● When charging is finished, the
lamp turns green.
3
Remove the battery pack.
● After unplugging the battery
charger, remove the battery pack
by pushing it in (1) and up (2).
● To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
● For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
(2)
(1)
CB-2LF
CB-2LFE
(1)
(2)