Canon PowerShot SX410 IS - Manual (Page 218)

218
ç Contents
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
● The memory card may be inserted facing the wrong way. Reinsert the
memory card facing the correct way (= 28).
Memory card locked
● The write-protect tab of the memory card is set to the locked position.
Switch the write-protect tab to the unlocked position (= 28).
Cannot record!
● Shooting was attempted without a memory card in the camera. To shoot,
insert a memory card facing the correct way (= 28).
Memory card error (= 171)
● If the same error message is displayed even after you have formatted a
supported memory card (= 3) and have inserted it facing the correct
way (= 28), contact a Canon Customer Support Help Desk.
Insufficient space on card
● There is not enough free space on the memory card to shoot (= 54,
= 83, = 97) or edit images (= 152). Either erase unneeded images
(= 142) or insert a memory card with enough free space (= 28).
Charge the battery (= 26)
No Image.
● The memory card does not contain any images that can be displayed.
Protected! (= 137)
Unidentified Image/Incompatible JPEG/Image too large./Cannot
play back MOV/Cannot play back MP4
● Unsupported or corrupt images cannot be displayed.
● It may not be possible to display images that were edited or renamed on
a computer, or images shot with another camera.