Çcontents – Canon PowerShot SX410 IS User Manual
Page 215
215
ç
Contents
Shots look grainy.
●
Lower the ISO speed (= 102).
Subjects are affected by red-eye.
●
Set [Red-Eye Lamp] to [On] (= 80) to activate the red-eye reduction
lamp (= 4) in flash shots. Note that while the red-eye reduction lamp
is on (for about one second), it is not possible to shoot, because the
lamp is counteracting red-eye. For best results, have subjects look at the
red-eye reduction lamp. Also try increasing the lighting in indoor scenes
and shooting at closer range.
●
Edit images using red-eye correction (= 158).
Recording to the memory card takes too long, or continuous
shooting is slower.
●
Use the camera to perform low-level formatting of the memory card (= 171).
Shooting settings or FUNC. menu settings are not available.
●
Available setting items vary by shooting mode. Refer to “Functions
Available in Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab”
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
●
Use the camera to format the memory card, or switch to a card
that supports high-speed recording. Note that even if the elapsed
time display is incorrect, the length of movies on the memory card
corresponds to the actual recording time (= 170, = 242).
[ ] is displayed and shooting stops automatically.
●
The camera’s internal memory buffer filled up as the camera could not record
to the memory card quickly enough. Try one of the following measures.
-
Use the camera to perform low-level formatting of the memory card
-
Lower the image quality (= 74).
-
Switch to a memory card that supports high-speed recording (= 242).