Canon PowerShot SX410 IS - Manual (Page 209)

209
ç Contents
Connection status of Eye-Fi cards in the camera can be checked
on the shooting screen (in regular information display mode) or
playback screen (in simple information display mode).
(Gray) Not connected
(Blinking white) Connecting
(White)
Connected
(Animated) Transfer in progress* 1
Interrupted
Not communicating
Error acquiring Eye-Fi card information*
2
*1 Power saving (= 44) on the camera is temporarily disabled during
image transfer.
*2 Restart the camera. Repeated display of this icon may indicate a
problem with the card.
Images labeled with a [ ] icon have been transferred.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the
connection status, as needed.
● Press the [ ] button,
choose [Eye-Fi Settings] on the
[ ] tab, and then press the [ ]
button.
● Choose [Connection info], and
then press the [ ] button.
● The connection information
screen is displayed.