Canon PowerShot SX410 IS - Manual (Page 113)

113
ç Contents
2
Choose a subject to focus on.
● Aim the camera so that [ ] is
on the desired subject, and then
press the [ ] button.
● When the subject is detected,
the camera beeps and [ ] is
displayed. Even if the subject
moves, the camera will continue
to track the subject within a
certain range.
● If no subject is detected, [ ] is
displayed.
● To cancel tracking, press the [ ]
button again.
3
Shoot.
● Press the shutter button halfway.
[ ] changes to a blue [ ], which
follows the subject as the camera
continues to adjust the focus and
exposure (Servo AF) (= 114).
● Press the shutter button all the
way down to shoot.
● Even after your shot, [ ] is
still displayed and the camera
continues to track the subject.