Olympus PEN-F Pancake Zoom 14-42mm Kit - Manual (Page 27)

27 EN
Shooting
2
Choosing aperture (A aperture-priority mode)
Mode A is a shooting mode where you choose the aperture and let the camera
automatically adjust to the appropriate shutter speed. Rotate the mode dial to A and
then use the front or rear dial to select an aperture value.
Larger apertures (lower F-numbers) decrease depth of fi eld (the area in front of or
behind the focus point that appears to be in focus), softening background details.
Smaller apertures (higher F-numbers) increase depth of fi eld.
Aperture value
250 250 F5.6 01:02:03 01:02:03
38 38
L N
A
ISO
400
S-IS AUTO S-IS AUTO
Wi-Fi
FHD F
60 P
• You can use the exposure compensation dial to select exposure compensation.
Setting the aperture value
Decreasing aperture value   Increasing aperture value
F2.8 F4.0 F5.6 F8.0 F11
• The shutter speed display will blink if the camera is unable to achieve correct
exposure.
Warning display
example (blinking)
Status Action
60" 60" F5.6 F5.6
The subject is
underexposed.
• Decrease the aperture value.
8000 8000 F5.6 F5.6
The subject is
overexposed.
• Increase the aperture value.
• If the warning display does not disappear,
the metered range of the camera is
exceeded. A commercially available ND
fi lter (for adjusting the amount of light) is
required.
• The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
• When using a fi xed [ISO] setting, change the setting. g [ISO] (P. 45 )