Nikon D7200 body - Manual (Page 83)

83 Menu Guide
Choose the flash mode for the built-in flash.
❚❚ Manual
Choose a flash level. Flash level is stated in fractions of full
power: at full power, the built-in flash has a Guide Number of 12/
39 (m/ft, ISO 100, 20°C/68°F).
❚❚ Repeating Flash
The flash fires repeatedly while the
shutter is open, producing a strobe-
light effect. Press
4 or 2 to highlight
the following options, 1 or 3 to
change.
e3: Flash Cntrl for Built-in Flash
G button
➜ A Custom Settings menu
Option Description
1
TTL
Flash output is adjusted automatically in
response to shooting conditions.
2
Manual
Choose the flash level. The camera does not
emit monitor pre-flashes.
3
Repeating flash
The flash fires repeatedly while the shutter is
open, producing a strobe-light effect.
4
Commander mode
Use the built-in flash as a master flash
controlling remote optional flash units in one or
more groups (
0 84).
Option Description
Output Choose flash output (expressed as a fraction of full power).
Times
Choose the number of times the flash fires at the selected
output. Note that depending on shutter speed and the
option selected for Frequency, the actual number of flashes
may be less than selected.
Frequency Choose how often the flash fires per second.