Yamaha CVP-705B - Manual (Page 45)

Editing a Voice (Voice Edit)
CVP-709/CVP-705 Reference Manual
45
*Reverb and Chorus depth cannot be edited when a VRM Voice is selected, but can be edited via [Menu] → [VoiceSetting] → [Piano]
(page 1/2). For details, refer to the Owner’s Manual “Playing Realistic Resonance-enhanced Piano Sounds (VRM Voices).”
Determines the Frequency and Gain of the EQ bands. For information about EQ, refer to page 11 .
From this display, you can set the same parameters as those in the Keyboard Harmony display (step 2 on page 23 ). Before
making any settings, make sure that the current part is set to Main; in other words, you should select the Main part by
touching the Voice name at the top of the Voice Edit display, or by pressing the VOICE [MAIN/LAYER/LEFT] button.
The settings here are called up automatically simply by selecting the corresponding Voice.
This section allows you to select the function to be assigned to the center or left pedal. Before making any settings, make
sure that the current part is set to Main; in other words, you should select the Main part by touching the Voice name at the
top of the Voice Edit display, or by pressing the VOICE [MAIN/LAYER/LEFT] button. The settings here are called up
automatically simply by selecting the corresponding Voice. For details about the pedal function, refer to
page 39 .
Modulation Amplitude Determines the degree to which the pedal modulates the amplitude (volume).
LFO Pitch Determines the degree to which the pedal modulates the pitch, or the vibrato effect.
LFO Filter Determines the degree to which the pedal modulates the Filter cutoff frequency, or the
wah effect.
LFO
Amplitude Determines the degree to which the pedal modulates the amplitude, or the tremolo
effect.
Effect
Insertion
Effect On/Off Turns the Insertion Effects on or off.
Type Selects the Insertion Effect Type. Select the Category then select the Type. You can
adjust the detailed parameters by touching
(Setting) and save them. Refer to
“Editing and Saving the Effect settings” ( page 13 ) for details.
Depth Adjusts the Insertion Effect Depth.
Variation Each Insertion Effect Type features the Variation which is turned off by default. You
can use this Variation and adjust the depth of some of its parameters by turning it on.
Refer to “Editing and Saving the Effect settings” (
page 13 ) for details.
NOTE Parameters that are grayed out cannot be edited.
Vibe Rotor Available only if “VibeRotor” in the “Legacy” category is selected as the Insertion Effect
Type explained above. Determines whether Vibe Rotor should be set to on or off when
selecting the Voice.
Reverb* Depth Adjusts the Reverb Depth.
Chorus* Depth Adjusts the Chorus Depth.
EQ
Keyboard Harmony
Pedal