Yamaha CVP-705B - Manual (Page 108)

CVP-709/CVP-705 Reference Manual
108
The Multi Channel Recording method lets you record data to each channel independently, one by one, up to 16. Here, you
will learn how to create a complete, two-handed piano piece by recording the right-hand part to channel 1, and then
recording the left-hand part to channel 2 while listening to the already recorded data. Before starting recording, make the
following panel settings:
• Turn the Man part on, and then select the desired piano voice as the Main part.
• Turn the Left and Layer parts off.
Recording the Right-hand Part
1
On the Home display, touch [ ] at the upper right to expand the Song area, then touch [ ]
(Rec) to call up the Song Recording window.
NOTE The contents of the Song Recording window differ depending on the panel settings.
NOTE Here and in the later steps, the operation in the Song area of the Home display can be controlled by the SONG CONTROL
buttons.
2
Touch [New MIDI].
3
Touch [ ] at the left of “Channel” to expand the Channel area.
4
Specify the target channel and part for recording.
4-1
From the display, set the Main part to [Rec], and set all other parts to [Off]. You can conveniently use
[Keyboard All] and [Style All] to turn multiple parts on/off.
4-2
Touch the channel number under the Main part you set to [Rec] in step 4-1. In the setting display that
appears, specify channel 1 for recording. If not changed, the Main part will automatically be recorded to
channel 1.
Recording the Right- and Left-hand Parts Separately
(MIDI Recording)
1
3
2