Yamaha CVP-705B - Manual (Page 21)

CVP-709/CVP-705 Reference Manual
21
Showing the Text Display and Editing
Text Display Settings
You can view the text file (.txt) created by using a computer on the instrument’s display. This feature enables various
useful possibilities, such as the showing of lyrics, chord names, and text notes.
If you want to view the text in a USB flash drive, connect the USB flash drive containing text data to the [USB TO
DEVICE] terminal beforehand.
1
Call up the Text display via [Menu] → [TextViewer].
2
Touch the bottom left corner on the display to call up the Text File Selection display.
3
Select the desired text file, and touch [Close] to show the text in the display.
If the text extends over several pages, you can scroll through the entire text by touching [] or [], which are
shown at the right and left of the page. To clear the text from the display, touch [×] located at right of the text file
name.
NOTE • Line breaks are not automatically entered in the instrument. If a sentence is not displayed in its entirety because of
limitations in the screen space, enter line breaks manually on your computer by using a text editor, etc. beforehand.
• The Text can be displayed on an external monitor or television. For details on instructions, refer to the Owner’s Manual.
• Information about Text File selection can be memorized to the Registration Memory. For details, refer to the Owner’s
Manual.
• You can change the page by flicking horizontally on the display.
Showing the Text Display
2
Page