ProSoft Technology RLX-OPC-SRV - Manual (Page 37)

DCOM Configuration RLX-OPC-SRV ♦ ProSoft Software
RadioLinx® OPC Server for Frequency Hopping and Industrial Hotspot™ Radios
ProSoft Technology, Inc. Page 37 of 108
January 22, 2009
5 DCOM Configuration
In This Chapter
™ DCOM Configuration ............................................................................. 37
™ My Computer Properties Checks........................................................... 38
™ Component Services ............................................................................. 44
™ RadioLinx OPC Server Properties......................................................... 50
5.1 DCOM Configuration
The following are instructions that will enable an OPC client in Windows XP and
Windows Vista to connect to the Local or Remote RadioLinx OPC Server.
This connection was performed where the user logged into the Local and the
Remote PC. Both PCs are in the same domain. Consult with your IT person
about DCOM Configuration for RadioLinx OPC Server when the OPC Server is
located on a separate domain from the OPC Client.
Caution: In the following examples the "permissions" have been given to all
potential users on the domain. You need to configure permissions to the specific users only, to fully
take advantage of the DCOM security options.
1 Click Start / Run. Enter dcomcnfg.exe
2 Click OK.
Follow this branch for going to My Computer in Component Services window.