ProSoft Technology RLX-OPC-SRV - Manual (Page 14)

RLX-OPC-SRV ♦ ProSoft Software Start Here
RadioLinx® OPC Server for Frequency Hopping and Industrial Hotspot™ Radios
Page 14 of 108 ProSoft Technology, Inc.
January 22, 2009
Tag name Description
Channel Mode Defines the physical serial interface which will be used for data
communications.
VALUES
RS-232
half-duplex RS-485
full-duplex RS-485
Data Baud Rate The serial baud rate is the rate at which the modem is to communicate with
the attached local asynchronous device.
VALUES
bits per second (bps)
300, 600, 1200, 2400, 3600, 4800, 7200, 9600, 14400, 19200, 28800,
38400, 57600, 115200, 230400
Data Format This value determines the format of the data on the serial port. The default
is 8 data bits, No parity, and 1 Stop bit.
VALUES
8N1
8N2
8E1
8O1
7N1
7N2
7E1
7O1
7E2
7O2
Radio Received
Bytes Number of bytes received by the Radio(RF).
Radio rEceived
Packets Number of packets received by the Radio(RF).
Radio Transmitted
Bytes Number of bytes transmitted by the Radio(RF).
Radio Transmitted
Packets Number of packets transmitted by the Radio(RF).
Repeaters in
System This setting applies to the Master only. The default value is No, stating
there are no Repeaters in the network. If there are 1 or more Repeaters in
the network, configure this setting as Yes.