ProSoft Technology RLX-OPC-SRV - Manual (Page 22)

RLX-OPC-SRV ♦ ProSoft Software Configuring the Server
RadioLinx® OPC Server for Frequency Hopping and Industrial Hotspot™ Radios
Page 22 of 108 ProSoft Technology, Inc.
January 22, 2009
Remote Server Procedure
1 Click File / Configure to Server / Connect to Server / Remote Server
Enter the IP address or the name of the computer that the remote server is
running on.
You can choose to attempt a secure remote connection, or not.
Note: If the IP address is not valid, you will receive a "Connection Failed" message.
Secure connections require certain Windows security options to be in place
before they will work. The unsecured remote connection is a lot more reliable,
but it is possible for others to intercept and interpret the messages that are
sent.
2 Click OK button.
3.2.2 Configure to File Mode
This section details how to create a custom configuration for your server.
Note: Do not connect to a server using the Configuring to Server method.
If you are connected to the server, disconnect before proceeding.
1 Select File / Configure to Server / Disconnect from Server.
The status bar (bottom of screen) should now say "Configuring to file."
2 Add a Channel. Select Edit / Add Channel
3 Choose a Channel name and Channel type.