Ericsson Multi-Format Receiver RX1290 - Manual (Page 43)

Operating the Equipment Locally
3.1 Powering the Equipment
3.1.1 Switching On
Caution!
This equipment should not be operated unless the cooling fan is working and there
is free-air flow around the unit.
Connect the signal inputs and AC power supply to the Multi-Format Receiver and
power up the unit. After a short period of initialization and the Multi-Format Receiver
gaining lock, the unit powers up in Navigate mode. This is the usual operating
condition.
The POWER LED will be on (green) when a signal is locked and off when unlocked.
See Figure 3.2 for the location of the POWER LED.
3.1.2 Power up Operating Modes
Figure 3.1 Power up Operating Mode
EN/LZT 790 0003/2 R1A 3-5