Ericsson Multi-Format Receiver RX1290 - Manual (Page 119)

Technical Specification
Description Test Signal Limit
K factor K 2T NTC-7 comp <1%
Pulse X bar K rating 100 +/- 1%
Frequency Response
(MultiBurst) FCC Multi-burst
0.5 MHz
1.25 MHz
2 MHz
3 MHz
3.58 MHz
4.1 MHz
0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.3 dB
0dB +/- 0.3 dB
Differential Gain NTC-7 comp <2%
Differential Phase NTC-7 comp <1 Degree
Non-Linearity NTC-7 comp <5%
Jitter <5nS
Weighted Luminance Noise Luminance Ramp <60 dB
Weighted Luminance Noise Flat Grey Field <63 dB
Chrominance PM Noise Flat Red Field <55 dB
B.1.4 Performance Figures
Table B.5 HD Analogue Output Specification
Parameter Value for
Y, R, G, B
Value for
Pb, Pr Condition Notes
Amplitude 700 mV ± 2% 700 mV ± 2% 100% color bar
DC offset ± 10 mV ± 10 mV Black field
Bandwidth DC to 10 MHz ± 0.2 dB
10 MHz to 20 MHz ± 1 dB
20 MHz to 30 MHz
+1 dB/-2.5 dB
DC to 10 MHz ±
0.2 dB
10 MHz to 15 MHz
±
1 dB
Sweep
Group delay DC to 30 MHz < 50nS DC to 30 MHz < 50nS
Noise DC to 30 MHz < -50 dB DC to 30 MHz < -
50 dB 100% ramp
Out-of-band noise 30 MHz to 100 MHz
< -50 dB 15 MHz to 100 MHz
< -50 dB Sweep
Linearity < 5% < 5% 5 step
EN/LZT 790 0003/2 R1A B-5