ProSoft Technology AN-X-AMX - Manual (Page 7)

AN-X-AMXCAPT Page 3
Package Contents
• AN-X-AMXCAPT module
• CD containing software and documentation
Other Requirements
To transfer data over Ethernet requires:
• 100 Mbit/second Ethernet network and hardware
• Ethernet network should uses switches, not hubs
Modes of Operation
There are three AN-X modes of operation:
• Boot mode. The AN-X is running its low level startup firmware.
• Configuration mode. This is the mode when you are updating the firmware
in the AN-X.
• Production mode. This is the normal runtime mode of operation.