ProSoft Technology AN-X-AMX - Manual (Page 23)

AN-X-AMXCAPT Page 19
Frame Data
Detailed Status
If the DetailSts option line is present, detailed status information is displayed for each
frame.
Immediately before the frame data are four columns, one each for CRC error, noise error,
abort error and overrun error. If the column contains a period, there has been no error or
the corresponding type in the frame.
Example: Frame 354 has no errors, frame 355 has CRC and abort errors, etc.
354: a 0:00:00.689,797 d 0,824 g 2,106 ....255< 05^ 6- 17
355: a 0:00:00.691,197 d 2,400 g 2,106 c.a.255< 05^ 6- 17
356: a 0:00:00.693,510 d 2,313 g 1,143 c... 6< 00^
357: a 0:00:00.698,756 d 4,246 g 1,054 c...255< 05^ 2- 4f
358: a 0:00:00.703,543 d 5,787 g 2,105 c...255< 05^ 2- 4f
359: a 0:00:00.707,389 d 3,846 g 2,096 c...255< 05^ 2- 41
360: a 0:00:00.711,217 d 3,828 g 2,555 ....255< 05^ 4- 00
If DetailedSts is not present, frames with bad status are shown with an asterisk in place of
the deatailed status information.
Data Format
The following option lines control the display of register data for DCSNet I/O update
frames (CTL = 5 or CTL = 6).
Option line Show register data as…
ShowRegInt integers, -32768 to 32767
ShowRegUns unsigned integers, 0 to 65535
ShowRegHex hexadecimal, 0000 to FFFF
ShowRegBin binary, 0000 0000 0000 0000 to 1111 1111 1111 1111
By default, all data is shown as bytes.
The following example shows the same in each format.
Default, bytes
4: a 0.004,958 g........ | 255< 05^ 55- 12 34 ff ff 33 33…
Hexadecimal
4: a 0.004,958 g........ | 255< 05^ 55- 1234 ffff 3333…