ProSoft Technology AN-X-AMX - Manual (Page 21)

AN-X-AMXCAPT Page 17
TIP You can use the delta time to display update times for a drop. Modify
the option file QTS_UpdFromDrop.opt to display the delta time and
include a delta time graph, set the drop number to the drop of interest
and display the selected frames.
3: a 0.006,823 d 6.823 d............. | 255< 06^ 1- 0000
8: a 0.015,232 d 8.409 d................ | 255< 06^ 1- 0000
11: a 0.020,729 d 5.497 d.......... | 255< 16^ 1- 0000
18: a 0.029,401 d 8.672 d................. | 255< 06^ 1- 0000
21: a 0.035,198 d 5.797 d........... | 255< 06^ 1- 0000
26: a 0.043,606 d 8.408 d................ | 255< 06^ 1- 0000
29: a 0.049,077 d 5.471 d.......... | 255< 06^ 1- 0000
32: a 0.054,557 d 5.480 d.......... | 255< 06^ 1- 0000
35: a 0.060,042 d 5.485 d.......... | 255< 06^ 1- 0000
38: a 0.065,532 d 5.490 d.......... | 255< 06^ 1- 0000
Graphs
The gap time and the delta time can be displayed as a text graph in the frame data.
The GrphGap option line sets the format of the gap time graph. The parameters are the
full scale width, in characters, and the full scale time, using the time units described
previously. Times are shown graphically using period ‘.’ characters.
Example: The following option line reserves 20 character spaces, corresponding to a full
scale of 5 ms
GrphGap 20 5ms
The gap time graph can be identified by a leading ‘g’. The end of the graph can be
identified by a ‘|’ character.
Example of a gap graph, showing the gap times and gap graph, produced using GrphGap
20,5:
1: a 0:00:00.000,000 g 2,252 g......... |
2: a 0:00:00.002,975 g 1,054 g.... |
3: a 0:00:00.009,338 g 0,184 g |
4: a 0:00:00.013,163 g 0,527 g.. |
5: a 0:00:00.015,998 g 0,182 g |
6: a 0:00:00.019,821 g 0,528 g.. |
7: a 0:00:00.020,536 g 0,181 g |
8: a 0:00:00.021,167 g 2,027 g........ |