ProSoft Technology AN-X-AMX - Manual (Page 36)

Page 32 AN-X-AMXCAPT January 2008
Utilities/AN-X IP Configuration resets the selected AN-X. Use the Utilities/Restart AN-X
to restart the AN-X in production mode.
If you Cancel the Utilities/AN-X IP Configuration command, AN-X is left running the
boot code. Use the Utilities/Restart AN-X command to restart the AN-X.
Restart an AN-X
Use the Utilities/Restart AN-X command to restart the currently selected AN-X.
AN-X Info
The Utilities/AN-X Info command provides information about the currently selected AN-
X in the log window.
The information shown:
AN-X Info Ethernet MAC address
SerNum Serial number
DaughterID Daughterboard ID, 3 for AN-X-AMXCAPT
BootRev Boot code version
ConfigRev Configuration kernel version
ProdRev Production kernel version
HwRev Hardware version
FirmwRev Firmware release version (depends on current operating mode)
Status see below
VendorId Vendor ID
ProdId Product ID
IpAddrStr IP address assigned using Utilities/AN-X IP Configuration
HostName name assigned using Utilities/AN-X IP Configuration
In boot mode, FirmwRev, Vendor ID and Product ID and not valid, and IpAddrStr and
HostName are not shown.
Possible status values are:
Value Meaning
1 Boot mode
2 Configuration mode
4 Production mode