ProSoft Technology AN-X-AMX - Manual (Page 17)

AN-X-AMXCAPT Page 13
It shows the current time, the file currently being used to store the capture data, the file
size, the file being deleted (ring buffer mode only), the number of good frames received,
and the number of bad frames received.
GoodRx is the number of frames with good status that have been captured.
BadRx is the number of frames with bad status (CRC error, abort, overrun, or noise) that
have been captured in the current file. If you are using the ring buffer method of capture
and the stop error limit is non-zero, BadRx is reset each time a new file opens.
The Free Space progress bar shows the amount of free space remaining on the disk drive.
To stop the capture, click Stop.
To cancel the capture, click Cancel. This stops the capture but does not delete any
captured data files. If AutoDump was checked, the Dump command is not executed.
Selecting Frames of Interest
Select Capture/Dump or click the Dump to Text button.
AnxAmxCapt displays the TextDump dialog.