ProSoft Technology AN-X-AMX - Manual (Page 44)

Page 40 AN-X-AMXCAPT January 2008
Using the Web Interface
The AN-X module contains a webserver capable of communicating with standard web
browsers such as Internet Explorer or Netscape.
The web interface is used for viewing AN-X logs.
To use the web interface, you need to know the IP address of the AN-X. Run AnxInit
and use the Utilities/Locate All AN-X Devices command to find all AN-X devices on the
Ethernet network.
To access the web interface, start your web browser and type the AN-X IP address where
you normally enter web addresses in the browser.
Log Files
AN-X maintains various logs to record diagnostic and error messages. Use the Utilities
menu in the web interface to view these logs.
System Error Log
The System Error log records errors that occur during AN-X operation. This log is
normally empty.
System Info Log
The System Info Log records informational messages during startup and normal
operation.
View All Logs
Use View All Logs to list and view all the AN-X logs. To view a log file, double click
on the file name.
Administration Menu
The Administration Menu is used to view and edit files on AN-X. It is password
protected and is used only for AN-X technical support.