Command error list data area, Rs-232, Rs-485 – ProSoft Technology 5201-DFNT-DH485 User Manual
Page 34
DH485 ♦ ProLinx Gateway
Reference
DH485 Interface
Driver Manual
Page 34 of 44
ProSoft Technology, Inc.
August 27, 2009
5.2
Command Error List Data Area
Word# Description
14200
Error code for command index 0.
14201
Error code for command index 1.
... ...
14299
Error code for command index 99.
5.3 RS-232
When the RS-232 interface is selected, you must use an AIC+ to connect the
port to a DH485. The cable required for this connection is shown in the following
illustration:
5.4 RS-485
The RS-485 uses a single two or three wire cable. The use of the ground is
optional and dependent on the RS-485 network. The cable required for this
interface is shown in the following diagram:
This manual is related to the following products: