ProSoft Technology 5201-DFNT-DH485 - Manual (Page 31)

Serial Port Protocol Error/Status Data DH485 ♦ ProLinx Gateway
Driver Manual DH485 Interface
ProSoft Technology, Inc.
Page 31 of 44
August 27, 2009
Error # Description
0x0809 Too many fields in request message
0x080A Symbol not found
0x080B Symbol 0 or greater than maximum characters permitted in message
0x080C Does not exist, illegal size
0x080D File wrong size, address past end of file
0x080E Data or file too large (memory not available)
0x080F Request too large to transmit message (size+address > max message)
0x0810 Access denied
0x0811 Command cannot be executed
0x0812 Illegal data type information
0x0813 Illegal parameter, invalid data in search or command block
0x0814 File open by another node
0x0815 Program owned by another node
0x0816 Unknown error returned from host
0x0817 No message active on the port
4.2.3 DH485 Configuration Error Word
Bit Code Description
0 0x0001 Invalid baud rate
1 0x0002 Invalid node address
2 0x0004 Invalid maximum node address
3 0x0008 Invalid token hold factor
4 0x0010 Invalid response timeout
5 0x0020 Invalid status or command error DB offset
6 0x0040 Invalid CIF read count or DB offset
7 0x0080 Invalid CIF write DB offset
8 0x0100 Invalid file size
9 0x0200 Invalid file offset
10 0x0400
11 0x0800
12 0x1000
13 0x2000
14 0x4000
15 0x8000