ProSoft Technology 5201-DFNT-DH485 - Manual (Page 10)

DH485 ♦ ProLinx Gateway Start Here
DH485 Interface Driver Manual
Page 10 of 44
ProSoft Technology, Inc.
August 27, 2009
3 Click to open the U TILITIES folder. This folder contains all of the applications
and files you will need to set up and configure your module.
4 Double-click the S ETUP C ONFIGURATION T OOL folder, double-click the
"PCB_*. EXE " file and follow the instructions on your screen to install the
software on your PC. The information represented by the "*" character in the
file name is the PCB version number and, therefore, subject to change as
new versions of PCB are released.
Note: Many of the configuration and maintenance procedures use files and other utilities on the
CD-ROM. You may wish to copy the files from the Utilities folder on the CD-ROM to a convenient
location on your hard drive.
1.5.1 Using the Help System
Most of the information needed to help you use ProSoft Configuration Builder is
provided in a Help System that is always available whenever you are running
ProSoft Configuration Builder. The Help System does not require an Internet
connection.
To view the help pages, start ProSoft Configuration Builder, open the H ELP
menu, and then choose C ONTENTS .