ProSoft Technology ILX34-MBS485 - Manual (Page 25)

Configuration
ProSoft Technology, Inc. Page 25 of 34
February 18, 2015
3.4.2 Configure Controller Tags
1. Expand the MBS_Config controller tag.
Serial Port
Set the following parameters to configure the Serial Port.
Label Description
Baud Rate 0=19200
2=2400
3=4800
4=9600
5=38400
Serial Comm 0=7N2
1=7E1
2=7O1
3=8N1 4=8N2
5=8E1
6=8O1
Protocol 0=ASCII
1=RTU
Master Configuration
The following parameters must be set to use the module as a Master.
Label
Description
Type
Set this to “0” for Master
Timeout Timeout in centiseconds. The time that
the master waits for a response from
the Slave.