ProSoft Technology ILX34-MBS485 - Manual (Page 12)

Installing the Adapter
Page 12 of 34 ProSoft Technology, Inc.
February 18, 2015
Warning: When you insert or remove the module while backplane power is on,
an electrical arc can occur. This could cause an explosion in a hazardous
location.
Be sure that power is removed or the area is non-hazardous before proceeding.
4. Remove the module to the right of the base you are removing (The
interlocking portion of the base sits under the adjacent module.).
5. Use a small blade screwdriver to rotate the orange DIN-rail locking screw
on the mounting base to a vertical position. This releases the locking
mechanism.
6. Lift the mounting base straight up and remove.
2.5 Connecting Power
Refer to the appropriate L1Y or Remote Adapter installation guides for adapter
configuration instructions.
2.5.1 CompactLogix L16/L18 Processor Power Connectivity
When using an L16/L18 CompactLogix Processor, make sure that the Field
Power (FP) is jumped to the Power on the CompactLogix (VDC).
VDC+ to FP+
VDC- to FP-